Electro Industries EB-MS-10 Operations Instructions

Browse online or download Operations Instructions for Water heaters & boilers Electro Industries EB-MS-10. Electro Industries EB-MS-10 Operating instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
03/19/2009 BI508
ELECTRO-BOILER
Midsize
INSTALLATION & OPERATING INSTRUCTIONS
Model EB-MS-10
EB-MS-15
EB-MS-20
APPLICATION:
This Electro-Boiler series is factory equipped with outlet temperature sensing and
a smart controller which automatically stages the various elements to operate at
the field preset outlet temperature.
Temperature sensing can reduce overheat conditions (example, zones); however,
if it is a mixture of large and small zones, the sudden capacity and flow changes
may cause some internal timing/over temp conditions. With the mixture of zones
the zone controller ZEA-* option is highly recommended (see page 2).
Generally, this series should be used with lower temperature, radiant floor.
Temperature dial position 6 (160°) is the recommended highest value for the type
of staging represented by this model series. The fully modulating series (EB-
MA-** or EB-MO-**) can operate much closer to the mechanical hi-limit and
show a dial position 7 or 180°. Also see page 10 and page 2.
ACCESSORIES:
Attached BL001 lists various accessory or option items which are not part of
basic Electro-Boiler. Also page 3 has additional information on slab stat.
Note:
This product meets the requirements of the ASME Boiler and Pressure
Vessel Code.
Drawings:
BX505
BX504
BH509
BS509
BL001
XX017
Page view 0
1 2 3 4 5 6 ... 24 25

Summary of Contents

Page 1 - ELECTRO-BOILER

03/19/2009 BI508 ELECTRO-BOILER Midsize INSTALLATION & OPERATING INSTRUCTIONS Model EB-MS-10 EB-MS-15 EB-MS-20 APPLICATION: This Elect

Page 2 - TABLE OF CONTENTS

03/19/2009 8 BI508 ELECTRICAL HOOKUP Reference drawing BH509 1. 240 Volt Heating Power – route and install the proper current carrying conductors

Page 3 - APPROVED TUBING/PIPING

03/19/2009 9 BI508 8. Remote Display – an optional remote display (4-wire stat cable) can be added, call factory for details. Also requires main bo

Page 4 - ZONE CONTROLLER

03/19/2009 10 BI508 CONTROLLER SETUP Temperature set point – the front red “knob” allows for field or user setting of the outlet water temperature.

Page 5 - ROOM THERMOSTAT PLACEMENT

03/19/2009 11 BI508  HI-LIMIT, red – this will only illuminate when the vessel hi-limit opens due to excessive high water temperature. This hi-lim

Page 6 - CAUTION

03/19/2009 12 BI508 REPLACEMENT PARTS WFSB Outlet sensor, 3 ft. EB5623S Controller, temp. sensing UFUSE0440 2-amp fuse, fast blow (AGC2) 5127 H

Page 7

03/19/2009 13 BI508 TROUBLESHOOTING/REPAIR HELPS 1. This temp. sensing controller contains several interference suppression components, but as an e

Page 8

NOTINCLUDEDEB-PK-MNOTINCLUDEDNOTINCLUDEDMANIFOLDRETURNMANIFOLDSUPPLYWATERSUPPLYCONNECTION16EB-PK-M151312711213456231333133251410982NO. PART NUMBER DES

Page 9

BX504Rev.A 02-14-06ELECTRO INDUSTRIES, INC.MONTICELLO, MN 55362ELECTRO-BOILER DUAL HEAT PIPING DIAGRAMWATER SUPPLYCONNECTION321NOTES:1. LOOSE PARTS SH

Page 10 - ELECTRICAL HOOKUP

BH509Rev.A 02-26-07ELECTRO INDUSTRIES, INC.MONTICELLO, MN 55362EB-MS-** HOOKUPNOTES:1. GROUNDING AND BONDING NOT SHOWN.2. CONDUCTOR SIZE AND WIRE TYPE

Page 11 - WATER FILL PROCEDURE

ELECTRO INDUSTRIES, INC.MONTICELLO, MN 55362HL3190°CB160AL2L1E1E2K1K2RRHL1-1205°HL1-2205°BKBKBKBKBKBKORWBLK1K2TO J41ORWBL345678RWRW910GYGYT2K1RSW2SW30

Page 12 - OPERATIONAL TIPS

03/19/2009 BI508 TABLE OF CONTENTS Description Page Introduction 1 System or Water Flow 2 Multiple Zones & Radiant Temperatures 2 Zone Contro

Page 13 - System Pressure

ELECTRO INDUSTRIES, INC.MONTICELLO, MN 55362CIRCUIT BREAKER5000W ELEMENTHI-LIMITRELAYCIRCUIT BOARDTAB TERMINALSCREW TERMINALCBEHLKPCTSCRELAY STAGING1

Page 14 - REPLACEMENT PARTS

ELECTRO INDUSTRIES, INC.MONTICELLO, MN 55362HL3190°CB260AL1L2CB160AL2L1E1E2E4K1K2K4K3RRRRHL1-1205°HL1-2205°HL2-2205°HL2-1205°BKBKBKBKE3BKBKBKBKBKBKBKB

Page 15 - TROUBLESHOOTING/REPAIR HELPS

BOILER ACCESSORIESBOILER ACCESSORIESThis will simplify your wiring and make zoning applications much easier. In addition, enhanced communicating feat

Page 16 - EB-M*-** MECHANICAL PIPING

07/24/2007 BL001• Handled as the priority zone on multi-zone (EB-ZEA-1) or two pump (EB-Z2P) controllers• Priority switch on, zone 1 active - TS bo

Page 17

Page 1 of 2 XX017 Electro Industries, Inc. Limited Product Warranty Effective February 5, 2009 Electro Industries, Inc. warrants to the original

Page 18

Page 2 of 2 XX017 THESE WARRANTIES DO NOT COVER: 1. Costs for labor for removal and reinstallation of an alleged defective product or product par

Page 19

03/19/2009 1 BI508 INTRODUCTION With this temperature sensing controller capability, the electric heating element stages are automatically turned on

Page 20

03/19/2009 2 BI508 SYSTEM OR WATER FLOW In order to prevent hi-limiting and assure full 20+ years parts life, the piping system/basic plumbing/circu

Page 21

03/19/2009 3 BI508 3. Two temperature system with unbalanced zones – if the application includes zone one requiring high temperature and the remaini

Page 22 - BOILER ACCESSORIES

03/19/2009 4 BI508 MULTIPLE BOILERS This boiler series now includes a method for automatically staging any number of parallel-plumbed boilers. Ord

Page 23 - CIRCULATING PUMPS

03/19/2009 5 BI508 2. This installation manual and Electro-Boiler products relate only to the addition of the Electro-Boiler to the hydronics system

Page 24 - Limited Product Warranty

03/19/2009 6 BI508 MECHANICAL INSTALLATION – UNDER-FLOOR RADIATION CAUTION Electro Industries Inc. requires the use of dielectric isolation between

Page 25 - CONDITIONS AND LIMITATIONS:

03/19/2009 7 BI508 MECHANICAL INSTALLATION – DUAL HEAT CAUTION Electro Industries Inc. requires the use of dielectric isolation between the boiler

Comments to this Manuals

No comments